Cards

,

Flowers for Every Season Memories & More Card Pack and Cinnamon Cider cardstock

,

What you will need:

Cardstock and Paper

  • Flowers for Every Season (FFES) Memories & More Card Pack, (use the scrap piece cut off to decorate the inside of the card)

  • Cinnamon Cider cardstock - 8 1/2 x 5 1/2 inches, score at 4 1/4 inches

  • Whisper White cardstock - 5 1/4 x 4 inches (inside layer)

  • Whisper White Medium Envelopes

Ink

  • Just Jade Classic Stampin’ Pad

Stamp Sets

  • Forever Fern stamp set

Tools

  • Stampin’ Seal

  • Stampin’ Dimensionals

  • Paper Snips

  • Paper Trimmer

Embellishments

  • 2020-2022 In Color Enamel Dots

  • Stickers and Sentiments are from the Flowers for Every Season Memories & More Card Pack

Step by Step Project Instructions:

  1. Stamp desired image on the envelope using Forever Greenery stamp set and Just Jade Classic Stampin’ Pad.

  2. This card is one of the simplest cards to put together. Find the small cards in the FFES Memories & More Card Pack that have the sentiments on the back, cut them apart using your Paper Trimmer and Paper Snips. Set aside the ones you would like to use.

  3. Trim the large Memories & More Card down to 5 1/4 x 4 inches, attach the leftover piece to the inside of the card.

  4. Arrange the words and stickers the way you desire, I used Stampin’ Dimensionals to pop the words up, and place the stickers near the words.

  5. Place the In Color Enamel Dots where you would like. I recommend using an odd number.

Shop for the products used for this project here:

,

One Sheet Wonder

,
IMG_0021.JPG

Use one sheet of 12 in x 12 in Designer Series Paper to make 12-16 cards.   You can use the same templates for a sheet of 6 in x 6 in Designer Series Paper.  Here I used By the Shore Designer Series Paper (DSP), my supplies coordinate with the colors in the DSP.

 

What You'll Need

Cardstock and Paper

  • Soft Sky Card Stock (CS)

  • Dapper Denim CS

  • Mint Macaron CS

  • Very Vanilla Neutral Card Stock (NCS)

  • By the Shore DSP

  • Very Vanilla Medium Envelopes

Inks

  • Dapper Denim Classic Stampin' Pad (CSP)

  • Calypso Coral CSP

  • Soft Sky CSP

  • Mint Macaron CSP

Stamp Sets

  • Seaside Shore

  • Teeny Tiny Wishes

  • Layering Love

  • Here For You

  • Designer Tin of Cards

  • All Things Thanks

  • Thankful Thoughts

  • Confetti Celebration

Tools

  • Big Shot

  • Layering Squares Framelits

  • Layering Oval Framelits

  • Layering Circles Framelits

  • Stitched Shapes Framelits

  • Project Life Cards & Labels Framelits

  • Banner Triple Punch

  • Classic Label Punch

  • Seaside Embossing Folder

Accessories

  • Mint Macaron 3/8 in Sheer Linen Ribbon

  • Very Vanilla 1/4 in Satin Ribbon

  • Neutrals Candy Dots (Retired)

  • Calypso Coral Washi Tape (Retired)

  • Rhinestone Basic Jewels

  • Pearl Basic Jewels

  • 2016-2018 In Color Enamel Shapes

  • White Perfect Accents

  • Lace Doilies

 

Tips and Tricks

Pay very close attention to the Patterns of the DSP, and make sure they follow the arrows on the OSW Maps.

 

Paper Options

Check out the shopping list at the bottom of the project or create your own.

 

Step by Step Instructions

Featured
First Card Base
First Card Base

Cut 4 pieces of Neutral CS in half parallel to the long side.

This will leave you with 8 card bases of 11 in w x 4 1/4 in h.

Use either Very Vanilla or Whisper White for your card bases.

Second Card Base
Second Card Base

Cut 4 pieces of Neutral CS in half parallel to the short side.

This will leave you with 8 card bases of 4 1/4 in w x 8 1/2 in h.

Use either Very Vanilla or Whisper White for your card bases.

Layer - First Color
Layer - First Color

Choose 3 coordinating colors to your DSP choice.  

Cut two of the coordinating colors to 6 pieces - 4 in w x 5 1/4 in h, the final color should be cut to 4 pieces (same size).

The color here is Dapper Denim.

Layer - Second Color
Layer - Second Color

Choose 3 coordinating colors to your DSP choice.  

Cut two of the coordinating colors to 6 pieces - 4 in w x 5 1/4 in h, the final color should be cut to 4 pieces (same size).

The color here is Soft Sky.

Layer - Third Color
Layer - Third Color

Choose 3 coordinating colors to your DSP choice.  

Cut two of the coordinating colors to 6 pieces - 4 in w x 5 1/4 in h, the final color should be cut to 4 pieces (same size).

The color here is Mint Macaron.

DSP Map #1
DSP Map #1

The DSP maps are broken up into four 6 in x 6 in squares, so that if you want to follow them for a 6 x 6 Paper Stack, you can.

Cut your piece of DSP in half both ways so you have four sheets 6 in w x 6 in h.

Follow each map for the rest of the cutting instructions.

Pay close attention to the direction of the Pattern on the DSP and make sure it is following the pattern arrows on the DSP maps.

DSP Map #2
DSP Map #2

The DSP maps are broken up into four 6 in x 6 in squares, so that if you want to follow them for a 6 x 6 Paper Stack, you can.

Cut your piece of DSP in half both ways so you have four sheets 6 in w x 6 in h.

Follow each map for the rest of the cutting instructions.

Pay close attention to the direction of the Pattern on the DSP and make sure it is following the pattern arrows on the DSP maps.

DSP Map #3
DSP Map #3

The DSP maps are broken up into four 6 in x 6 in squares, so that if you want to follow them for a 6 x 6 Paper Stack, you can.

Cut your piece of DSP in half both ways so you have four sheets 6 in w x 6 in h.

Follow each map for the rest of the cutting instructions.

Pay close attention to the direction of the Pattern on the DSP and make sure it is following the pattern arrows on the DSP maps.

DSP Map #4
DSP Map #4

The DSP maps are broken up into four 6 in x 6 in squares, so that if you want to follow them for a 6 x 6 Paper Stack, you can.

Cut your piece of DSP in half both ways so you have four sheets 6 in w x 6 in h.

Follow each map for the rest of the cutting instructions.

Pay close attention to the direction of the Pattern on the DSP and make sure it is following the pattern arrows on the DSP maps.

Neutral CS Map #1
Neutral CS Map #1

This is how you will be cutting your Neutral CS.  

Use either Whisper White CS, or Very Vanilla CS to coordinate with the DSP you choose.

I used Very Vanilla CS to coordinate with By the Shore DSP.

(Tip:  You will be using the unmarked pieces for other images you want on the cards, so set these aside for later use.)

Neutral CS Map #2
Neutral CS Map #2

This is how you will be cutting your Neutral CS.  

Use either Whisper White CS, or Very Vanilla CS to coordinate with the DSP you choose.

I used Very Vanilla CS to coordinate with By the Shore DSP.

(Tip:  You will be using the unmarked pieces for other images you want on the cards, so set these aside for later use.)

 

Finished Cards

 

Shopping List

This shopping list shows all options available, pick and choose what you need.

Balloon Adventures Pop-up Card

BALLOON ADVENTURES POP UP CARD

Brief description of Project

 

What You Will Need

Cardstock and Paper

  • bullet point
  • bullet point

Inks

  • bullet point
  • bullet point

Tools

  • bullet point
  • bullet point

Accessories

  • bullet point
  • bullet point
 

Tips and Tricks

Placeholder content.

 

Step by Step Instructions

Featured
Card Stock Base
Card Stock Base

Cut to 5 1/2 in w x 8 1/2 in h.

Fold in half, use a Bone Folder to reinforce the crease.

Whisper White Stamped Card Front Layer
Whisper White Stamped Card Front Layer

Cut your Whisper White CS to 3 3/4 in w x 5 in h.

Stamp the Balloon Strings and Streamers using Classic Stampin' Pads.  The colors used here are Pacific Point, Tangerine Tango, Emerald Envy, and Crushed Curry.

Party Animal DSP Card Front Layer (Candles)
Party Animal DSP Card Front Layer (Candles)

Cut desired DSP to 3 3/4 in w x 2 1/2 in h.

If your DSP has a specific orientation, be sure you take that into consideration before cutting.

 

Balloon Images for Card Front
Balloon Images for Card Front

Stamp balloon striped balloon image  and polka dot balloon image on a piece of Whisper White CS using Classic Stampin' Pads.  The colors used here are Crushed Curry and Emerald Envy.

Cut a striped balloon image from Pacific Point CS, and the polka dot image from Crushed Curry CS using the Big Shot and the Balloon Pop-Up Thinlits Dies.  

Cut the solid balloon image from Tangerine Tango CS using the Balloon Bouquet Punch.

After you have everything cut out, line up the striped images and polka dot images and adhere.  (You should now have 3 different balloons for the front of your card).

Use Stampin' Dimensionals on the back of the Tangerine Tango balloon.  Use Mini Glue Dots on the back of the layered balloons.  Set aside until you are ready to assemble the card.

Present/Greeting Image for Card Front
Present/Greeting Image for Card Front

Using the Layering Squares Framelits Dies and the Big Shot, cut a 2 1/8 in square out of Emerald Envy CS, and a 1 7/8 in square out of Whisper White CS.  

Stamp your greeting on Whisper White square using Pacific Point Classic Stampin' Pad.

Cut the large bow image from Tangerine Tango CS using the Balloon Pop-Up Thinlits Dies and the Big Shot.

Adhere the Whisper White square to the Emerald Envy square. Adhere the Tangerine Tango bow to the squares so it looks like a present.  Put Stampin' Dimensionals on the back of the present and set aside until you are ready to assemble the card.

 

Party Animal DSP Inside
Party Animal DSP Inside

Cut Party Animal DSP 2 inw x 5 in h (make sure to pay attention to the orientation of the DSP),

Balloon Adventures Shaker Card

BALLOON ADVENTURES SHAKER CARD

This is a placeholder for this card.

 

What You Will Need

Paper and Cardstock

  • Bullet point
  • Bullet point

Inks

  • Bullet point
  • Bullet point

Tools

  • Bullet point
  • Bullet point

Accessories

  • Bullet point
  • Bullet point
 

Tips and Tricks

This is a placeholder for tips I want people to know.

 

Step by Step Instructions

Featured
Basic Black CS Base
Basic Black CS Base

Cut your CS base to 11 in w x 4 1/4 in h.

Neutrals Designer Series Paper Stack (DSPS)
Neutrals Designer Series Paper Stack (DSPS)

Cut a piece of Basic Black 12 x 12 Neutrals DSPS to 4 in w x 5 1/4 in h.

Basic Black CS Layer - Front of Card
Basic Black CS Layer - Front of Card

Cut your Basic Black CS to 3 1/2 in w x 5 in h.

Center the Thinlits Die over your Basic Black CS, run through Big Shot to accomplish this look.

Window Sheets Layer - Front of Card
Window Sheets Layer - Front of Card

Cut a Window Sheet to 3 1/2 in w x 5 in h.

Basic Black Window - Front of Card
Basic Black Window - Front of Card

Line up and adhere your Window Sheet layer to your cut Basic Black layer.  (Make sure you rub your Embossing Buddy over the Window Sheet to keep the static from interfering with the "shaker" contents).

Line the back of this layer with Foam Adhesive Strips.  Set this layer aside.

 

Whisper White Embossed Layer - Front of Card
Whisper White Embossed Layer - Front of Card

Cut a piece of Whisper White CS to 3 1/2 in w x 5 in h.

Using the Big Shot and the Sparkle TIEF, emboss the Whisper White layer.

Balloons and Candle Confetti
Balloons and Candle Confetti

Cut a 2 in w x 6 in h piece of the Sweet Sugarplum Glimmer Paper, and the Bermuda Bay Glimmer Paper from the SAB 6 x 6 Glimmer Paper.

Cut a balloon from each color using the striped balloon and the polka dot balloon images from the Balloon Pop Up Thinlits Dies.

Punch a row of candle confetti of each color for your shaker contents using the Candle Border Punch.

Cut a 2 in w x 12 in h piece of Silver Glimmer Paper.  

Confetti
Confetti

Place your candle confetti and a small handful of the Metallic Sequins Assortment on the inside of the Window Sheet layer.

Shaker
Shaker

With the embossed side to the inside of the Window Sheet layer, adhere the sparkle embossed Whisper White CS layer to the Window Sheet layer by removing the backing of the Foam Adhesive Strips.

Set this aside until you are ready to assemble your card.

Balloons and Greeting - Front of Card
Balloons and Greeting - Front of Card

Punch a large balloon out of the Silver Glimmer Paper using the Balloon Bouquet Punch.

Using the Big Shot and either the Sunshine Wishes Thinlits or the Mini Treat Bag Thinlits, cut a greeting from the Silver Glimmer Paper for the front of the card.

 

Inside Greeting Layer with Bermuda Bay
Inside Greeting Layer with Bermuda Bay

Cut a piece of Whisper White CS to 3 3/4 in w x 7/8 in h.

Stamp partial greeting on it using Bermuda Bay Classic Stampin' Pad.

Inside Banner
Inside Banner

Cut the inside banner partial greeting using the Banner Triple Punch.

Whisper White layer - Inside
Whisper White layer - Inside

Cut a piece of Whisper White CS 4 in w x 5 1/4 in h for the inside of the card.

Stamp the inside greeting using Tuxedo Black Memento Pad.

Adhere the partial greeting banner you stamped with Bermuda Bay Classic Stampin' Pad over the same words you stamped in Tuxedo Black Memento Pad.

Adhere to the inside of the card.

Final Image
Final Image

Layer your card accordingly as shown.

Shopping List

Placeholder for Stampin' Up code

Home
Classes and Events
Projects
Join the Creative Joy Team
Card Ministry
Paper Pumpkin

Find peace with each piece you create.

The content in this website and blog is my sole responsibility as an Independent Stampin’ Up! Demonstrator and the use of and content of the classes, services, or products offered here is not endorsed by Stampin’ Up!.